0

Out of 0 Ratings

Owner's of the 3M Computer Monitor r3M Touch Screen Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 35
 
3M™ MicroTouch™ Display M1500SS User Guide 11
3M Touch Systems, Inc. Proprietary Information
Document #19-258 Rev AH
CHAPTER 2
Setting Up Your M1500SS Display
This chapter describes how to set up and integrate your 3M
TM
MicroTouch
TM
M1500SS
Display into a touch application system. You need to complete the following tasks:
Unpack the components
Connect the video and power cables to your computer
Power on the display and test your setup
Install the MT 7 software then connect the sensor cable
Calibrate the touch sensor
System Requirements
The M1500SS Display requires a personal computer (PC). This touch display will not
work with Apple Macintosh computers.
The requirements for your PC are as follows:
Your PC must have an available RS-232 serial communication (COM) port or USB
port. You connect the touch sensor to this port.
Your PC must have a video card and video driver already installed for the display. If
you need to install a video card or a video driver, refer to your computer
documentation for instructions.
Your PC must have a unique interrupt request (IRQ) available to the touch sensor
COM port. The touch sensor cannot share an IRQ with another device.
When choosing your workspace, select a sturdy, level surface. Also, make sure you can
easily access the back of the touch display and the computer. Easy access helps ensure a
smooth setup of the touch display.
Note: Before setting up your M1500SS Display, refer to the Important Safety
Information section at the beginning of this document.