0

Out of 0 Ratings

Owner's of the 3M Projector 3M Mobile Projector gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 51
 
32
English
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
Power
Select and press to activate power settings. The power menu provides the following
options:
Power Saving
Select Off to disable Power Saving mode. By default, the projector is set to enter
power saving mode after 120 minutes of no activity. A warning message appears on
screen showing a 60 seconds countdown before switching to power saving mode.
Press any button during the countdown period to stop the power-saving mode.
You can also set a different delay period to enter power saving mode. The delay
period is the time you want the projector to wait without an input signal. Power saving
can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the
delay period, the projector turns off. To turn on the projector, press the Power button.
LED Mode
Allows you to select between Normal or ECO mode. Normal mode operates at full
power level. ECO mode operates at a lower power level which may provide longer
LED life, quieter operation, and dimmer luminance output on the screen.
Projector Mode
Allows you to select the projector mode, depending upon how the projector is
mounted.
Front: This is the default option.
Rear: The projector reverses the image so that you can project from behind a
translucent screen.
Front Ceiling: The projector turns the image upside down for ceiling-mounted
projection.
Rear Ceiling: The projector reverses and turns the image upside down. You can
project from behind a translucent screen with a ceiling-mounted projection.