0

Out of 0 Ratings

Owner's of the Actiontec electronic Portable Multimedia Player Actiontec MyWirelessTV gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 34
 
Connecting MyWirelessTV
Connecting MyWirelessTV consists of two parts: connecting the
Transmitter to a source of high-denition video, and connecting the
receiver to a high-denition television monitor. is chapter will take you
through both procedures, as well as setting up the IR Blaster and IR
Receiver to allow you to use the remote control of the source device in the
location you are watching (or playing) your content.
Connecting the MyWirelessTV Transmitter
1. e Transmitter must be installed near the video’s source device (set
top box, Blu-ray player, gaming console, etc.)
2. Get one of the power supplies from the MyWirelessTV kit and plug the
small end of the Power adapter into the 5VDC (Power) port of the back
of the Transmitter
3. Plug the other end into an electrical wall socket. e PowerLED will
glow solid green.
4. Unplug the HDMI cable that connects the source device to the
television monitor from the source device. It should now only be
connected to the monitor.
5. Plug the free end of the HDMI cable you unplugged in step 4 into the
HDMI Out to TV port on the back of the Transmitter. is cable
should now connect the television monitor to the Transmitter.
6. Get an HDMI cable from the MyWirelessTV kit and plug one end into
the HDMI Input port on the back of the Transmitter.