0

Out of 0 Ratings

Owner's of the AT&T Cordless Telephone TL7000 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 33
 
4
Getting started
Handset lifter installation
5. Pick up the lifter, turn it over, and peel
the paper from the adhesive tape.
6. Carefully return the lifter to the same
position that you noted before and
press down.
7. Follow the headset base installation
steps on pages 6-10.
8. Remove the handset from your tele-
phone.
9. Press ON/OFF on the headset and listen
for the dial tone. Make sure the switch
hook presser is in its non-extended
condition.
10. Adjust the motor back and forth (as
shown on the left) to set the switch
hook presser just above the switch
hook.
11. Press down on the lifter arm until the
switch hook presser firmly touches
the switch hook on the telephone.
Then slide the lifter arm height con-
trol down one notch at a time. Stop
adjusting when you hear the dial tone
from the headset or handset earpiece,
or when you see the telephone’s line
indicator light.
Adhesive tape
Motor
ON/OFF
button