0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 25734 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 14
 
- 8 -
Wiring Connections
CONTROL
RJ45 Ethernet Connector
ALARMS
1 Alarm 1 Blue
2 Alarm 2 Violet
3 Alarm 3 Gray
4 Common White
POWER
1 Camera Power (24VAC) Red
2 Camera Power (24VAC) Orange
Installing Axis 231D/232D Camera (cont.)
7. Then start (3) 8-32x3/8” phillips head screws onto the (3) ½" spacers inside
the housing. Be sure to place the screws so that they line up with the (3)
open slots on the quick release bracket, the screws on the bottom of the
camera, see diagram below.
(3) 8-32 x 3/8"screws
8. Locate the connector block,
which is included with the
camera. Then located the
connector block bracket,
which is included with the
housing. Attach the block
to the bracket as shown
in the following diagram.
Use the M3 screws
and washers that are
located in the housing
packet.
9. Attach the connector
block assembly to the
housing using (1) 6-
32x3/8” screw and star
washer located in the
housing packet.
10. Make wiring connections to connector block assembly per
camera instructions.