Brother Fax Machine FAX2820 User Manual

0

Out of 0 Ratings

Owner's of the Brother Fax Machine FAX2820 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 161
 
Chapter 11
11 - 15
Print Quality Difficulties
Printed pages are curled. Low quality thin or thick paper can cause this problem. Make sure you select the
Paper Type that suits the media type you use. (See About paper on page 1-8.)
Printed pages are smeared. The Paper Type setting may be incorrect for the type of print media you are
using—OR—The print media may be too thick or have a rough surface. (See
About paper on page 1-8 and Basic tab in the Software User’s Guide on the
CD-ROM (MFC-7220 or MFC-7225N).)
Printouts are too light. If this problem occurs when making copies or printing received faxes, turn off
Toner Save mode in the machine itself. (See Toner Save on page 2-7.)
Set Toner Save mode to off in the Advanced tab in the printer driver. (See
Advanced tab in Software User’s Guide on the CD-ROM (MFC-7220 or
MFC-7225N).)
Network Difficulties (MFC-7225N only)
I cannot print over the Network Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list and check the current settings. (See Printing
reports on page 7-1.) Reconnect the LAN cable to the hub to verify that the cabling
and network connections are good. If possible, try connecting the machine to a
different port on your hub using a different cable. If the connections are good, the
machine shows LAN Active.
DIFFICULTY SUGGESTIONS

   Find Your Products By Category