Out of 8 Ratings

Owner's of the Brother All in One Printer MFC-8220 gave it a score of 4.1 out of 5. Here's how the scores stacked up:
  • Reliability

    4.0 out of 5
  • Durability

    4.14 out of 5
  • Maintenance

    4.12 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    4.0 out of 5
of 203
If you are having difficulty with your MFC
If you think there is a problem with the way your faxes look, make a
copy first
. If the copy looks good, the problem is probably not your
MFC. Check the chart below and follow the troubleshooting tips.
Printing or Receiving Faxes
Condensed print and
horizontal streaks or the top
and bottom of sentences are
cut off.
If your copy looks good, you probably had a bad connection, with static
or interference on the telephone line. If the copy looks bad, clean the
scanner area. If there is still a problem, call Brother or your dealer for
Vertical black lines when
Sometimes you may see vertical streaks/black lines on the faxes you
receive. Your MFC’s primary corona wire for printing may be dirty, or the
sending party’s fax scanner may be dirty. Clean your primary corona
wire. (See Cleaning the drum unit on page 12-24.) Ask the sender to
make a copy to see if the problem is with the sending machine. Try
receiving from another fax machine. If the problem continues call your
dealer for service.
Horizontal streaks; lines are
You may get a fax with horizontal streaks or with missing lines. Usually
this is caused by a poor telephone connection. Ask the other party to
send the fax again.
Received faxes appear as split
or blank pages.
If the received data is divided and printed on two pages or if you get an
additional blank page, make sure that auto reduction setting is turned
On. (See Printing a reduced incoming fax (Auto Reduction) on page
Phone Line or Connections
Dialling does not work Check for a dial tone. Change Tone/Pulse setting. (See Setting Tone
or Pulse dialling mode (Excluding the Nordic Countries)
on page 4-13.)
Check all line cord connections.
The MFC does not answer
when called.
Make sure the MFC is in the correct receiving mode for your setup. (See
Choosing the Receive Mode on page 5-1 and To select or change your
Receive Mode on page 5-2.) Check for a dial tone. If possible, call your
MFC to hear it answer. If there is still no answer, check the telephone
line cord connection. If there is no ringing when you call your MFC, ask
your telephone company to check the line.
Sending Faxes
Poor sending quality. Try changing your resolution to Fine or S.Fine. Make a copy to check
your MFC’s scanner operation. If copy quality is not good, clean the
scanner. (See Cleaning the scanner on page 12-22.)
Transmission Verification
Report says ‘RESULT:NG’ or
There is probably temporary noise or static on the line. Try sending the
fax again. If you send a PC FAX message and get ‘RESULT:NG’ or, on
the Transmission Verification Report, your MFC may be out of memory.
To gain extra memory, you can turn off Fax Storage (see Setting Fax
Storage on page 8-2), print fax messages in memory (see Polling on
page 5-11) or cancel a Delayed Fax or Polling Job (see Cancelling a fax
in progress on page 6-9). If the problem continues, ask the telephone
company to check your phone line.