AMX Universal Remote MIO R-1 AUDIO User Manual

3.0

Out of 1 Ratings

Owner's of the AMX Universal Remote MIO R-1 AUDIO gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 30
 
MIO Remote Charging Base
13
MIO R-1 AUDIO
5. Remove the back housing.
6. Place the new housing on the device so that the rechargeable battery port connection is now
accessible. See FIG. 8.
7. Replace the 6 screws.
8. Connect the terminal end of the Lithium-Ion battery to the port shown in FIG. 8. It may be
necessary to use a thin, blunt object to fully seat the battery connector within its port.
9. Press the battery between the rubber pads, with sticker showing, in the housing area of the MIO
remote. Confirm battery is flush with bottom of battery enclosure on bottom housing.
10. Replace the battery door and slide to lock it in place.
11. Begin charging the battery.
Charging The MIO Remote with Charging Base
The MIO remotes receive power for charging from a charging base.
1. Connect the terminal end of the power supply to the bottom external power port on the MIO remote
charging base. See FIG. 6 for location.
2. Route the cable through the provided channel so that it comes out the side of the base.
3. Connect the power cord to an external power source.
4. Place the bottom of the MIO remote into the charging base so the contacts on the device are on top
of the charging contacts inside the charging base. The Power LED on the MIO remote blinks red to
indicate it is charging and illuminates solid red when it is done. Full charge cycle for a depleted
battery is approximately 3 hours.
Avoid placing units equipped with AAA batteries in the charging base.
FIG. 8 Rechargeable Battery Port on The MIO Remote
Lithium Ion Battery
Rechargeable
Battery
Port Connection

   Find Your Products By Category