APC Baby Monitor NETBOTZ User Manual

0

Out of 0 Ratings

Owner's of the APC Baby Monitor NETBOTZ gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 40
 
4 NetBotz 455 Installation and Quick Configuration Manual
Physical Description
Front
Item Description
Vented internal
sensors
Vented opening for airflow, temperature, and humidity sensors.
Network link LED Shows the status of the network connection. Blinks to indicate network
traffic (green—connected at 10 Mbps; yellow—connected at 100 Mbps).
Power LED Indicates whether the unit is receiving power (green—receiving power;
dark—not receiving power).
Camera LED Blinks steadily when the integrated camera is active.
Alert LED Indicates the alert status of the system. When more than one alert exists,
the most severe will be indicated.
• Flashing once every eight seconds—Informational
• Flashing once every four seconds—Warning
• Flashing once every two seconds—Error
• Flashing once every second—Critical
• Flashing twice per second—Failure
Temperature
display
• Displays the current temperature from 0 to 99 in Centigrade or
Fahrenheit. Temperature reading from internal temperature sensor. If
the temperature exceeds 99, the display will flash 99.
• When the unit first receives power, displays the unique identifier
number for one minute.
• If an alert exists, flashes at the same rate as the Alert LED.
• During a firmware upgrade, displays 88.
Lens housing Must be removed to change the focus of the integrated camera.

   Find Your Products By Category