0

Out of 0 Ratings

Owner's of the Apricorn Portable Media Storage Solid State Drive With 256-Bit Encryption gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 19
 
www.apricorn.com
11
Adding a new User Password
You can add a new User Password by doing the following:
1. Enter the Admin Mode (refer to page 9 for details).
2. Press and hold + 1 until the indicator light ashes blue intermittently.
3. Enter a User Password and press (a minimum of 6 digits and a maximum
of 16 digits) The indicator light ashes green three times.
4. Re-enter the new User Password and press . If the indicator light stays
solid green for two seconds and then solid blue, the User Password was
added successfully.
Deleting the User Passwords
You can delete all User Passwords by doing the following:
1. Enter the Admin Mode (refer to page 9 for details).
2. Press and hold 7 + 8 + for ve seconds until the indicator light ashes blue
intermittently. After the indicator light ashes green three times and then blue
intermittently.
3. Press and hold 7 + 8 + a second time for ve seconds until the indicator
light goes on solid green for two seconds and then back to solid blue, this
indicates that the User Passwords were deleted successfully.
Changing the User Password
You can change the User Password by doing the following:
1. Enter User Mode (refer to page 8 for details).
2. Press and hold + 1 until the indicator light ashes red.
3. Enter your old password and press . The indicator light will turn green,
then change to ashing blue.
4. Enter the new password and press (The Password must be a minimum of
6 digits and a maximum of 16 digits). The indicator light will ash green three
times.
5. Re-enter the new User Password and press . The indicator light stays solid
green indicating that the User Password has been changed successfully.