Atlas Sound Car Speaker AL2430-2PH User Manual

0

Out of 0 Ratings

Owner's of the Atlas Sound Car Speaker AL2430-2PH gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
AtlasSound.com – 8 –
Specifications are subject to change without notice.
Owner’s ManualAL2430-2PH
Wireless Infrared Classroom
Sound Reinforcement System
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
26. Microphone
High quality internal microphone is used when the unit is in
the handheld or lapel configuration.
27. Mode LEDs
These two LEDs indicate the current mode of the AL-PH.
(See page 9 for details)
28. IR LEDs
These separate clusters of IR LEDs ensure quality
communications with an AL-IRDS regardless of which
configuration the AL-PH microphone is in.
29. Battery Cover
Conceals two “AA” rechargeable batteries, IR channel switch
and Lockout mode switch.
30. IR Channel Switch
This slide switch sets the microphone channel “A” or “B”.
31. Lockout Switch
When this switch is set to the Lockout mode the unit works
as a microphone only, no operation buttons function. Also
referred to as "Student Mode".
32. Panic Button
Used in conjunction with the Mode button. A signal is sent to
the AL2430 Receiver / Amplifier to close the "Panic" relay that
sends a message to an external source, like a school's paging
system.
33. Mute Button
Depressing this button in Mode 1 mutes the Microphone
output of the AL2430 Receiver / Amplifier.
Depressing this button in Mode 2 mutes the multimedia
output of the AL2430
34. Power LED
Displays the battery power of the AL-PH.
Green indicates good battery power.
Red indicates Low battery power.
Off indicates the Microphone is turned off.
35. Headset Microphone Input
3.5mm jack for connection of the optional AL-HSM headset
microphone. When connected the internal microphone is
disabled.
36. Belt Clip/Lanyard Clip
Used to attached AL-PH to belt for Headset configuration or
to the included Lanyard for a lapel configuration.
37. Mode Button
Used to switch the AL-PH from Mode 1 or Mode 2 (See page
9 for detailed operation of Modes).
38. Power Button
When the AL-PH is Off holding this button for 3 seconds will
turn the unit on. In the On mode holding this button for 3
seconds will turn the unit Off.
39. Volume Button
Depressing the UP or DOWN button in Mode 1 will raise or
lower the microphone volume, Depressing the UP or DOWN
button in Mode 2 will raise or lower the multimedia volume.
27
28
28
39
38
37
26
36
29
35
34
33
32
3130
AL-PH Wireless Microphone Description

   Find Your Products By Category