Atlona Log Splitter Atlonda 1 by 2 HDMI Distribution Amplifier User Manual

0

Out of 0 Ratings

Owner's of the Atlona Log Splitter Atlonda 1 by 2 HDMI Distribution Amplifier gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 9
 
4
-
+
AT-HDDA-2
DC 5V
HDMI OUT
HDMI IN
EDID
1 2
POWER
SYNC
OUT 2
OUT 1
INT
LEARN
FIRMWARE
-
+
AT-HDDA-2
DC 5V
HDMI OUT
HDMI IN
EDID
1 2
POWER
SYNC
OUT 2
OUT 1
INT
LEARN
FIRMWARE
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Back Panel
1. HDMI IN: Connect to an HDMI source
2. HDMI OUT: Connect to a display
3. DC 5V: Captive screw power connector
1
32
EDID (Extended Display Identification Data)
When the HDDA is completely connected and turned on it will load the Internal EDID™
automatically, which supports the highest common native video resolution and audio format of the
devices.
Example: With a mix of resolutions and audio formats the HDDA will default to the highest
common video resolution and audio format. In the diagram below the default would be 720p with
2ch audio. Multi-channel audio and 3D are not enabled on internal mode, unless all devices
support these features.
EDID learn mode loads the highest common resolution and audio format between output 1 and the
source and mirrors to all outputs. *EDID learning only available for output 1*
To learn EDID press and hold the EDID button until the EDID learn LED flashes. Learning is
completed once the LED is solid.
Note: Using the above diagram, output 2 will receive no audio or video once EDID is learned.
Output 2
1080p (3D) Dolby TrueHD
Output 1
720p-2ch
1080p-Dolby TrueHD (3D)

   Find Your Products By Category