Cuisinart Bottle Warmer BFM-1000 User Manual

0

Out of 0 Ratings

Owner's of the Cuisinart Bottle Warmer BFM-1000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 21
 
7
NOTE: We recommend that you don’t run the unit continuously in
CHOP for more than 1 minute at a time. For the best results, allow for
20 to 30 seconds rest time between cycles.
BOTTLE WARMER
NOTE: These instructions are to be used as a guide only. Please
note that there are many variables, such as size of the bottle and
starting temperature of the food which can affect the speed as well
as the  nal temperature at which this unit warms the bottle or jar.
Adjustments to the instructions below may be necessary. Always test
the temperature of food before feeding baby.
1. Lift the cover of the unit and remove the measuring cup from the
steam/bottle warming chamber. It is important to make sure
there is no water in chamber before bottle warming*.
* To empty the unit of excess water open the cover and remove the
measuring cup from the Steam/Bottle Warming chamber.Tilt the unit
onto its left side over the sink and any extra water will come out.
2. Use the bottle warming side of the measuring cup and  ll it with
water to the marked position that coincides with the amount of milk
being warmed (see chart below). Pour the pre-measured amount
of water from the measuring cup directly into the steam/bottle
warming chamber.
3. When warming a narrow bottle the adapter ring should be used
(see adapter ring instructions below). Do not use the adapter ring
with glass bottles.
4. Let the bottle sit for 15 to 30 seconds before removing and be
extremely careful removing the bottle from the unit. Shake the bottle
to distribute the heated contents before checking the temperature.
5. Put the bottle into the Steam/Bottle Warming chamber and turn
the dial to STEAM and the LED light will illuminate.The unit and
the LED light will shut off automatically once bottle warming is
complete. Turn the dial to the OFF position.
ADAPTER RING
1. Put the bottle into the steam/bottle warming chamber.
2. Unsnap the adapter ring from the tabs located under the top
cover of the unit.
3. Place the adapter ring over the bottle.
Note: If the adapter ring does not fi t loosely around the bottle,
do not use it.
Note: Do not use adapter ring with glass bottles.
4. Turn the dial to STEAM. The unit will shut off automatically once
bottle warming is complete. Turn the dial to the OFF position.
5. Let the bottle sit for 15 to 30 seconds before removing and be
extremely careful removing the bottle from the unit. Shake the bottle
to distribute the heated contents before checking temperature.
Always test the temperature of food before feeding baby.
Bottle Warming Guide
Bottle Capacity Cool Bottle (refrigerator) Warm Bottle (room temperature)
5ºC/40ºF20ºC/70ºF
4 oz 12 ml 8 ml
9 oz 12 ml 8 ml
1.
2.
3.

   Find Your Products By Category