D-Link Network Router Wireless N Router User Manual

4.4

Out of 4 Ratings

Owner's of the D-Link Network Router Wireless N Router gave it a score of 4.4 out of 5. Here's how the scores stacked up:

  • Reliability

    4.5 out of 5

  • Durability

    4.5 out of 5

  • Maintenance

    4.5 out of 5

  • Performance

    4.25 out of 5

  • Ease of Use

    4.25 out of 5
of 83
 
54D-Link DIR-615 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use
Auto if you have wireless clients using both WPA and WPA2.
4. Next to Authentication Timeout, enter the amount of time before
a client is required to re-authenticate (60 minutes is default).
5. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
6. Next to RADIUS Server Port, enter the port you are using with
your RADIUS server. 1812 is the default port.
7. Next to RADIUS Server Shared Secret, enter the security key.
8. If the MAC Address Authentication box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
Configure WPA-Enterprise (RADIUS)

   Find Your Products By Category