Dual Marine RADAR Dual Marine RADAR User Manual

0

Out of 0 Ratings

Owner's of the Dual Marine RADAR Dual Marine RADAR gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 40
 
29
AMB600W OPERATION
Bluetooth
®
 Operation
MostBluetoothdevicessupporttheauto-connectfeature,andwillconnectautomatically
ifthedeviceisinrangewhentheAMB600Wispowered-on.Ifyourdevicewaspreviously
pairedbutdoesnotconnect,usetheseinstructionsbelow.Somedevicesrequire
authorizationtoallowtheautoconnectfeature.
•IfyourmostrecentlyconnectedBluetoothdevicebecomesdisconnectedordoesnot
reconnect,press fromBluetoothmodetoreconnectyourmobiledevice.
•Toconnectapreviouslypaireddevicethatwasnotrecentlyconnected:
1)Ifapplicable,pressandhold todisconnectanyconnectedmobiledevices.
2)FromBluetoothmode,pressSELECT."PairedDevices"willappearontheLCD.
3)Turnthevolume knob tocyclethroughthelistofdevices.
4)PressSELECT or toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:IftheAuto ConnectsetupmenusettingissettoOFF,youmustpress toconnect
youdeviceafterpairing,andeachtimetheAMB600Wispowered-on.
Pressandhold for3secondstodisconnectaconnecteddevice.Thedevicewillremain
pairedandappearinthePAIREDDEVICESmenu,butnotbeconnected.
BeforeyoucanuseaBluetoothdevice,itmustbepairedand
connected.MakesurethatBluetoothisactivatedonyour
devicebeforeyoubeginthepairingprocess.
TheAMB600Wbroadcaststhepairingsignalconstantly
whennodevicesarecurrentlyconnected.Completethe
pairingsequencefromyourBluetoothdevice.Refertothe
owner'smanualforyourdeviceformoredetails.
The device name is "DUAL BT"  
The Bluetooth passcode "1234" 
Note:TheAMB600Wcanbeinanymodeofoperationwhen
pairingisperformed.
Ifadeviceiscurrentlyconnected,pressandhold to
disconnectthecurrentdevicebeforeanewdevicecanbe
paired.Thenbeginthepairingsequencefromthenew
Bluetoothdevice.
Preparation
Pairing a New Device
Pairing Additional Devices
Pairing a Device
(Re)Connecting a Paired Device
Disconnecting a Device

   Find Your Products By Category