Axis Communications Security Camera 463001 User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 463001 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 65
 
AXIS Q1604-E Network Camera
Hardware Overview
SD Card Slot
An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specications.
NOTICENOTICE
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control Button
The control button is used for:
• Enabling the Focus Assistant. Press and very quickly release the Control button.
• Resetting the product to factory default settings. See page 54.
• Connecting to an AXIS Video Hosting System service. See page 47. To connect, press and hold the button for about 1
second until the Status LED ashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 47. To connect, press and hold the button for about 3 seconds.
LED Indicators
LED indicators in camera
LED
Color
Indication
Green
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Amber
Steady for connection to 10 Mbit/s network. Flashes for network activity.
Network
Unlit No network connection.
Green Steady green for normal operation.
Amber
Steady during startup, during reset to factory default or when restoring settings.
Status
Red
Slow ash for failed upgrade.
Power
Green
Normal operation.
Amber
Flashes green/amber during rmware upgrade.
Note
• The Status LED can be congured to ash while an event is active.
• The Status LED can be congured to be unlit during normal operation, or to ash only when the camera is accessed. To
congure, go to Setup > System Options > LED settings. See the online help les for more information.
• The Status LED can be congured to ash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Status LED on housing (fan and heater)
Color
Indication
Green OK
Flashing
green
Single ash: Heater error
Double ash: Fan error
Triple ash: General error
Alarm events will be triggered through the camera’s input port.
See the User’s Manual, available on the CD provided with this product, or from www.axis.com
Contact your Axis reseller for information about spare parts and troubleshooting.
10

   Find Your Products By Category