Axis Communications Security Camera 463001 User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 463001 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 65
 
AXIS Q1604-E Network Camera
Accessing the Product
2. Enter a password and then re-enter it to conrm the spelling.
3. Click OK. The password has now been congured.
Congure Capture Mode
The capture mode setting reduces image icker in uorescent light environments. Select the capture mode with the power line
frequency (50 Hz or 60 Hz) used at the location of the Axis product and click OK.
When using 50 Hz, the maximum frame rate is limited to 25 fps.
Note
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of
the world use 50 Hz. Local variations may apply, always check with the local authorities.
See also Capture Mode, on page 23.
The Live View Page
The controls and layout of the Live View page may have been customized to meet specic installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how
to congure stream proles, see page 23.
Click Pulse to activate the product’s output port for a dened period of time. For information about how to enable
and congure output buttons, see page 30.
Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information
about how to enable and congure output buttons, see page 30.
The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to
congure and enable the button, see Manual Trigger, on page 14.
Click Snapshot to open a new window with a snapshot image of the video stream. Right-click on the image to
save it as PNG. This button is primarily intended for use with browsers other than Microsoft Internet Explorer, or
when otherwise not using ActiveX to view the video stream. Enable this button from Live View Cong > Action
Buttons. The ActiveX viewing component for Microsoft Internet Explorer (AXIS Media Control) provides its own
snapshot button, which is enabled by default.
The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio
clip and click the Play button.
Manual Trigger
The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to
validate actions during product installation and conguration.
To congure the manual trigger:
14

   Find Your Products By Category