Cisco Systems Riding Toy Cisco Firewall User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Riding Toy Cisco Firewall gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 42
 
6
Step 4 To access the Startup Wizard, use the PC connected to the switch or hub and enter the URL
https://192.168.1.1/startup.html into your Internet browser.
Note Remember to add the “s” in “https” or the connection fails. HTTPS (HTTP over SSL)
provides a secure connection between your browser and the PIX 515E.
Step 5 Leave both the username and password boxes empty. Press Enter.
Step 6 Select Yes to accept the certificates and follow the instructions in the Startup Wizard to set up
your PIX 515E. For online Help, click the Help button at the bottom of the Startup Wizard
window.
4 Example Configurations
The following section provides configuration examples for two common PIX 515E configuration
scenarios: hosting a web server on a DMZ network and establishing a site-to-site VPN connection with
other business partners or remote offices. Use these examples to set up your network. Substitute
network addresses and apply additional policies as needed.
DMZ Configuration
A demilitarized zone (DMZ) is a neutral zone between private (inside) and public (outside) networks.
A DMZ allows you to have a presence on the public Internet, while protecting private network
resources that are accessed by users on the public Internet; for example, mail servers or web servers.
The illustration below shows a sample network topology that is common to most DMZ
implementations using the PIX 515E, in which the web server is on the DMZ interface. HTTP clients
from the inside and the outside networks are able to access the web server securely.
In the illustration below, an HTTP client (10.10.10.10) on the inside network initiates HTTP
communications with the DMZ web server (30.30.30.30). HTTP access to the DMZ web server is
provided for all clients on the Internet; all other communications are denied. The network is
configured such that the range of available IP addresses on the DMZ interface are between
30.30.30.50–30.30.30.60. There are two publicly routable IP addresses available, one for the
PIX 515E outside interface (209.165.156.10) and one for the translated DMZ server
(209.165.156.11). Because the DMZ server is located on a private DMZ network, it is necessary to
translate its private IP address to a public (routable) IP address. This public address allows external
clients HTTP access to the DMZ server as though it was located on the Internet. Use PDM to quickly
configure your PIX 515E for secure communications between HTTP clients and web servers.

   Find Your Products By Category