Crestron electronic Marine Sanitation System QUICK MEDIA DISTRIBUTION CENTER User Manual

0

Out of 0 Ratings

Owner's of the Crestron electronic Marine Sanitation System QUICK MEDIA DISTRIBUTION CENTER gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 40
 
QuickMedia Distribution System Crestron QM-MD4x2
Specifications
Specifications for the QM-MD4x2 are listed in the following table.
QM-MD4x2 Specifications
SPECIFICATION DETAILS
Power Requirements 11 Watts (0.46 Amp @ 24 VDC)
Default Net ID 07
Control System Update Files
2-Series Control System
1, 2
Version C2-V3.093.CUZ or later
Input Channels 4 QuickMedia channels over RJ-45
Output Channels 2 QuickMedia channels over RJ-45
QuickMedia Performance
Gain
Nominal input impedance
Nominal output impedance
Differential input impedance
Differential output impedance
0 dB
100 Ohms
100 Ohms
50 Ohms common
50 Ohms common
QM-MD4x2 Firmware QM-MD4x2.v4.10.upg or later
Rack Space 1U high
Operating Temperature and Humidity 41º to 104º F (5º to 40º C),
10 to 90% Relative Humidity (non-condensing)
Dimensions and Weight Height: 1.70 in (4.32 cm) without mounting feet
Width: 17.03 in (43.24 cm) without mounting ears
Depth: 6.64 in (16.35 cm)
Weight: 3.0 lbs (1.4 kg)
1. The latest software versions can be obtained from the Downloads | Software Updates section of the
Crestron website (www.crestron.com). Refer to the NOTE following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
The MD4x2 is housed in a black enclosure with labeling on the front and rear panels.
Twelve buttons with accompanying light emitting diodes (LEDs) on the front panel
are used for local control of source and destination signal switching. The source and
destination selection buttons can be custom-labeled with Crestron Engraver software
and 100-pound paper. Two LEDs on the front panel indicate power and network
activity. All QM, Cresnet
®
, and power connections are made to the back of the unit.
A pushbutton on the rear panel with an accompanying LED is used to set the
MD4x2’s network ID. Refer to the following illustrations of the front and rear panels
and the physical views.
Two mounting ears are provided for rack mounting, and four square rubber feet are
supplied for stability and to prevent slippage in tabletop placement or stacking
configurations.
4 • QuickMedia Distribution System: QM-MD4x2 Operations Guide - DOC. 6278

   Find Your Products By Category