D-Link Marine Radio D-Link Unified Access Point Administrators User Manual

0

Out of 0 Ratings

Owner's of the D-Link Marine Radio D-Link Unified Access Point Administrators gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 128
 
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 36
March 2012
Section 4 - Managing the Access Point
Field Description
Hostname Enter a hostname for the AP. The hostname appears in the CLI prompt.
•) The hostname has the following requirements:
•) The length must be between 1 – 63 characters.
•) Upper and lower case characters, numbers, and hyphens are accepted.
•) The rst character must be a letter (a – z or A – Z), and the last character cannot be a
hyphen.
MAC Address Shows the MAC address for the LAN interface for the Ethernet port on this AP. This is a
read-only eld that you cannot change.
Management VLAN
ID
The management VLAN is the VLAN associated with the IP address you use to access the
AP. The default management VLAN ID is 1.
Provide a number between 1 and 4094 for the management VLAN ID.
Untagged VLAN If you disable the untagged VLAN, all trafc is tagged with a VLAN ID.
By default all trafc on the UAP uses VLAN 1, which is the default untagged VLAN. This
means that all trafc is untagged until you disable the untagged VLAN, change the untagged
trafc VLAN ID, or change the VLAN ID for a VAP or client using RADIUS.
Untagged VLAN ID Provide a number between 1 and 4094 for the untagged VLAN ID. Trafc on the VLAN that
you specify in this eld will not be tagged with a VLAN ID.
Connection Type If you select DHCP, the UAP acquires its IP address, subnet mask, DNS, and gateway
information from a DHCP server.
If you select Static IP, you must enter information in the Static IP Address, Subnet Mask,
and Default Gateway elds.
Static IP Address Enter the static IP address in the text boxes. This eld is disabled if you use DHCP as the
connection type.
Subnet Mask Enter the Subnet Mask in the text boxes.
Default Gateway Enter the Default Gateway in the text boxes.
DNS Nameservers Select the mode for the DNS.
In Dynamic mode, the IP addresses for the DNS servers are assigned automatically via
DHCP. This option is only available if you specied DHCP for the Connection Type.
In Manual mode, you must assign static IP addresses to resolve domain names.
IPv6 Admin Mode Enable or disable IPv6 management access to the AP
IPv6 Auto Cong
Admin Mode
Enable or disable IPv6 auto address conguration on the AP.
When IPv6 Auto Cong Mode is enabled, automatic IPv6 address conguration and gateway
conguration is allowed by processing the Router Advertisements received on the LAN port.
The AP can have multiple auto congured IPv6 addresses.
Static IPv6 Address Enter a static IPv6 address. The AP can have a static IPv6 address even if addresses have
already been congured automatically.
Static IPv6 Address
Prex Length
Enter the static IPv6 prex length, which is an integer in the range of 0 – 128.
IPv6 Autocongured
Global Addresses
If the AP has been assigned one or more IPv6 addresses automatically, the addresses are
listed.
IPv6 Link Local
Address
Shows the IPv6 Link Local address, which is the IPv6 address used by the local physical
link. The link local address is not congurable and is assigned by using the IPv6 Neighbor
Discovery process.
Default IPv6
Gateway
Enter the default IPv6 gateway.
Table 17 - Ethernet Settings
Note: After you congure the wired settings, you must click Apply to apply the changes and
to save the settings. Changing some settings might cause the AP to stop and restart system
processes. If this happens, wireless clients will temporarily lose connectivity. We recommend that
you change AP settings when WLAN trafc is low.

   Find Your Products By Category