D-Link Marine Radio D-Link Unified Access Point Administrators User Manual

0

Out of 0 Ratings

Owner's of the D-Link Marine Radio D-Link Unified Access Point Administrators gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 128
 
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 81
March 2012
Section 7 - Maintaining the Access Point
2.) Use the Browse button to select the le to restore.
3.) Click the Restore button.
A File Upload or Choose File dialog box displays.
4.) Navigate to the directory that contains the le, then select the le to upload and click Open.
(Only those les created with the Backup function and saved as .xml backup conguration les are valid to use
with Restore; for example,
ap_cong.xml.)
5.) Click the Restore button.
A dialog box opens verifying the restore.
6.) Click OK to proceed.
The AP reboots. A reboot conrmation dialog and follow-on rebooting status message displays. Please wait for
the reboot process to complete, which might take several minutes.
The Administration Web UI is not accessible until the AP has rebooted.
Performing AP Maintenance
From the Maintenance page, you can reset the AP to its factory default settings or reboot the AP.
Figure 49 - Performing AP Maintenance
Resetting the Factory Default Conguration
If you are experiencing problems with the UAP and have tried all other troubleshooting measures, click Reset. This
restores factory defaults and clears all settings, including settings such as a new password or wireless settings. You
can also use the reset button on the back panel to reset the system to the default conguration.
Rebooting the Access Point
For maintenance purposes or as a troubleshooting measure, you can reboot the UAP. To reboot the AP, click the
Reboot button on the Conguration page.
Upgrading the Firmware
As new versions of the UAP rmware become available, you can upgrade the rmware on your devices to take
advantage of new features and enhancements. The AP uses a TFTP client for rmware upgrades. You can also use
HTTP to perform rmware upgrades.
After you upload new rmware and the system reboots, the newly added rmware becomes the primary image. If the
upgrade fails, the original rmware remains as the primary image.
Note: When you upgrade the rmware, the access point retains the existing conguration
information.
Use the following steps to upgrade the rmware on an access point by using TFTP:
1.) Select TFTP for Upload Method.

   Find Your Products By Category