0

Out of 0 Ratings

Owner's of the AT&T Cordless Telephone TL7000 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 33
 
9
Getting started
Handset lifter installation
Headset base installation with lifter (see Figure 4)
1. Plug one end of the telephone line cord (provided with your
telephone) into the telephone jack.
2. Plug the other end of the telephone line cord into the wall
jack.
3. Make sure the small end of the power adapter is plugged into
the green POWER jack on the headset base.
4. Plug the large end of the power adapter into a power outlet
not controlled by a wall switch.
5. Plug the lifter control cable into the blue LIFTER jack on the
headset base.
6. Unplug the curly handset cord from the telephone.
7. Plug the curly handset cord into the light blue CURLY CORD
jack on the headset base.
8. Plug one end of the telephone line cord (provided with the
lifter) into the base handset jack on the telephone where the
curly handset cord was plugged in.
9. Plug the other end of the line cord into the orange
BASE JACK on the headset base.
10. Continue to adjust the lifter audio on the headset base (see
page 10) , and then go to step 8 on page 4 to complete the
rest of the lifter installation.