Beltronics Radar Detector Sti r Plus User Manual

0

Out of 0 Ratings

Owner's of the Beltronics Radar Detector Sti r Plus gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 16
 
12 13
How to use Settings
There are 10 user-selectable options you
can customize on your STiR Plus. The
buttons labeled VOL and BRT on the
controller are used to enter Settings. Once
you enter Settings, the VOL button is used
to REVIEW your current choices, and BRT
button is used to CHANGE settings. See
Pages 14-16 for more detail.
How to use Settings
1 To enter Settings, press and hold
both the VOL and BRT buttons down
for 2 seconds. (The unit will display the
word
Settings, accompanied by a voice
announcement).
2 Press the VOL button to review the
current settings. (You can either tap the
button to change from item to item, or hold
the button to scroll through the items).
3 Press the BRT button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4 To exit Settings, simply wait 8
seconds without pressing any button,
or press the PWR button
(
). (The unit
will display
Complete, accompanied by a
voice announcement).
An example
Here is how you would turn the AutoMute
feature off.
1 Enter Settings by holding both the VOL
and BRT buttons down for 2 seconds. The
STiR Plus will display the word
Settings,
accompanied by a voice announcement.
2 Then hold the VOL/RVW button down.
The STiR Plus will scroll through the categories,
starting with
Pilot, GPS, aLock, sChk,
Meter, then aMute.
3 Release the VOL/RVW button when the
STiR Plus shows the AutoMute item. Since
the factory setting for AutoMute is on, the
display will show aMute ON.
(If you accidentally don’t release the VOL/
RVW button in time, and STiR Plus goes to the
next category, simply hold the VOL /RVW
button down again, the STiR Plus will scroll
through all of the categories.)
4 Press the BRT/CHG button to change
from
aMute ON to aMute OFF.
5 To exit Settings, simply wait 8 seconds
without pressing any button, or press the
PWR button
(
). The STiR Plus will display
Complete, accompanied by a voice
announcement.
Overview of Settings
Press the VOL button
to go from one category
to the next
PILOT
(Power-on indication)
GPS
AUTOLOCK
SPEED CHECK
METER
AUTOMUTE
UNITS
VOICE
BANDS
MARKERS
* Factory Default Settings
To reset STiR Plus to its
original factory settings,
press and hold the “VOL”
and “SENS” buttons while
turning the power on.
The STiR Plus’s display
will provide a Reset
message, accompanied
by an audible alert,
acknowledging the reset.
Pilot HWY
Pilot H
Pilot V
Pilot SPD
GPS ON
GPS OFF
aLock ON
aLock OFF
sChk ON
sChk OFF
Meter STD
Meter THT
Meter TEC
aMute ON
aMute OFF
Units ENG
Units MET
Voice ON
Voice OFF
Bands DFT
Bands MOD
X ON
or OFF (default is ON)
K ON or OFF (default is ON)
KaSW ON or OFF (default is ON)
POP ON or OFF (default is OFF)
SWS ON or OFF (default is OFF)
LSR RECV or BLCK or OFF (default is RECV)
RDR ON or OFF (default is ON)
TSR ON or OFF (default is OFF)
Mark DFT
Mark MOD
rCam ON
or OFF (default is ON)
sCam ON or OFF (default is ON)
aCam ON or OFF (default is ON)
Trap ON or OFF (default is ON)
Othr ON or OFF (default is ON)
Press the BRT/CHG button
to change your setting
within a category
* Full word: Highway, AutoScn, etc.
Letter: H, A, C, Cnx
Vehicle voltage
Vehicle speed
* GPS On
GPS Off
* AutoLock On
AutoLock Off
* Speed Check On
Speed Check Off
* Bar-graph Meter
Threat Display
Tech Display
* AutoMute On
AutoMute Off
* Units English
Units Metric
* Voice Alerts On
Voice Alerts Off
* Factory Default Settings
Factory Default Settings Modified
Turn bands ON or OFF by
pressing the MUTE button
* Factory Default Settings
One or more bands have been modified
When KaSW is off,
each Ka segment can be turned on or off
Ka1 (33.392 - 33.704) ON or OFF (default is off)
Ka2 (33.704 - 33.896) ON or OFF (default is off)
Ka3 (33.886 - 34.198) ON or OFF (default is off)
Ka4 (34.184 - 34.592) ON or OFF (default is off)
Ka5 (34.592 - 34.808) ON or OFF (default is off)
Ka6 (34.806 - 35.166) ON or OFF (default is off)
Ka7 (34.143 - 35.383) ON or OFF (default is off)
Ka8 (35.378 - 35.618) ON or OFF (default is off)
Ka9 (35.595 - 35.835) ON or OFF (default is off)
Ka10 (35.830 - 35.998) ON or OFF (default is off)

   Find Your Products By Category