Beltronics Radar Detector Sti r Plus User Manual

0

Out of 0 Ratings

Owner's of the Beltronics Radar Detector Sti r Plus gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 16
 
14 15
Details of Settings
Pilot (Power-on indication)
Pilot HWY (Full word)
In this setting, the STiR Plus will display
“Highway,” “AutoScn,” “City,” or “CityNox”
as its power-on indication. (factory
default)
Pilot H (Letter)
In this setting, the STiR Plus will display
“H” for Highway, “A” for AutoScan, “C” for
City, and “Cnx” for City NoX.
Pilot V (Vehicle voltage)
In this setting, the STiR Plus will display
“H” for Highway, “A” for AutoScan, “C” for
City, and “Cnx” for City NoX,
accompanied by the vehicle’s voltage.
NOTE: A high or low voltage
warning is given any time the vehicle’s
voltage drops below 10.5 volts, or goes
above 16.5 volts. This feature is always
on, regardless of the Pilot setting.
Pilot SPD (Vehicle speed)
In this setting, the STiR Plus will display
“H” for Highway, “A” for AutoScan, “C” for
City, and “Cnx” for City NoX,
accompanied by the vehicle’s voltage.
NOTE: When you are using the
Dark mode, the display will not
display anything. Only the power-on
indication on the controller will
illuminate.
GPS
GPS On (GPS receiver on)
In this setting, all GPS related features are
on. (factory default)
GPS Off (GPS receiver off)
In this setting, all GPS features are off.
Auto Lock
aLock On (AutoLock is on)
In this setting, the STiR Plus will
constantly analyze all incoming radar
signals and lock out false alarms
automatically over time. (factory default)
aLock Off (AutoLock is off)
In this setting, any false alerts will need to
be locked out manually using the Mute
button.
Speed Check
sChk On (Speed Check is on)
In this setting, your current vehicle speed
is displayed, then the meter you’ve
selected. (factory default)
sChk Off (Speed Check is off)
In this setting, speed alert is off.
Signal Strength Meter
Meter STD (Standard meter)
In this setting, the meter displays the band
of the signal received, and a bar-graph
showing the relative signal strength.
(factory default)
Meter THT (ThreatDisplay)
In this setting, the meter will
simultaneously track multiple radar
signals, including relative signal strength
for each.
Meter TEC (Tech Display meter)
In this setting, the meter will display the
actual numeric frequency of the radar
signal received.
NOTE: The Tech Display feature is
explained in more detail on page 11.
AutoMute
aMute ON (AutoMute on)
In this setting, the STiR Plus’s audio alerts
will initially be set to the volume you set,
but after a few seconds, the STiR Plus will
automatically reduce the volume level, to
keep you informed, but not annoyed.
(factory default)
aMute OFF (AutoMute off)
With AutoMute off, the STiR Plus’s audio
alerts will remain at the volume you set for
the duration of the encounter.
Units
Units ENG (units are in English)
In this setting, all speed and distance
related functions are displayed in English
units. (factory default)
Units MET (units are in Metric)
In this setting, all speed and distance
related functions are displayed in Metric
units.

   Find Your Products By Category