D-Link Video Game Controller d-link wireless controller User Manual

0

Out of 0 Ratings

Owner's of the D-Link Video Game Controller d-link wireless controller gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 181
 
Wireless Controller User Manual
12
To configure LAN Connectivity, please follow the steps below:
1. In the LAN Setup page, enter the following information for your controller:
IP address: (factory default: 192.168.10.1).
If you change the IP address and click Save Settings, the GUI will not
respond. Open a new connection to the new IP address and log in again. Be
sure the LAN host (the machine used to manage the controller) has obtained
IP address from newly assigned pool (or has a static IP address in the
controller‘s LAN subnet) before accessing the controller via changed IP
address.
Subnet mask: (factory default: 255.255.255.0).
2. In the DHCP section, select the DHCP mode:
None: the controller‘s DHCP server is disabled for the LAN
DHCP Server. With this option the controller assigns an IP address within
the specified range plus additional specified information to any LAN device
that requests DHCP served addresses.
DHCP Relay: With this option enabled, DHCP clients on the LAN can
receive IP address leases and corresponding information from a DHCP
server on a different subnet. Specify the Relay Gateway, and when LAN
clients make a DHCP request it will be passed along to the server
accessible via the Relay Gateway IP address.
If DHCP is being enabled, enter the following DHCP server parameters:
Starting and Ending IP Addresses: Enter the first and last continuous
addresses in the IP address pool. Any new DHCP client joining the LAN is
assigned an IP address in this range. The default starting address is
192.168.10.100. The default ending address is 192.168.10.254. These
addresses should be in the same IP address subnet as the controller‘s LAN
IP address. You may wish to save part of the subnet range for devices with
statically assigned IP addresses in the LAN.
Default Gateway (Optional): Enter the IP address of the controller which
you want to make it as a default other than DWC-1000
Primary and Secondary DNS servers: If configured domain name system
(DNS) servers are available on the LAN enter their IP addresses here.

   Find Your Products By Category