D-Link Video Game Controller d-link wireless controller User Manual

0

Out of 0 Ratings

Owner's of the D-Link Video Game Controller d-link wireless controller gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 181
 
Wireless Controller User Manual
52
3.4.2 Dynamic Routing (RIP)
Setup > Internet Settings > Routing Mode
Dynamic routing using the Routing Information Protocol (RIP) is an Interior
Gateway Protocol (IGP) that is common in LANs. With RIP this controller can
exchange routing information with other supported controllers in the LAN and allow
for dynamic adjustment of routing tables in order to adapt to modifications in the
LAN without interrupting traffic flow.
The RIP direction will define how this controller sends and receives RIP packets.
Choose between:
Both: The controller both broadcasts its routing table and also processes RIP
information received from other controllers. This is the recommended
setting in order to fully utilize RIP capabilities.
Out Only: The controller broadcasts its routing table periodically but does
not accept RIP information from other controllers.
In Only: The controller accepts RIP information from other controller, but
does not broadcast its routing table.
None: The controller neither broadcasts its route table nor does it accept any
RIP packets from other controllers. This effectively disables RIP.
The RIP version is dependent on the RIP support of other routing
devices in the LAN.
Disabled: This is the setting when RIP is disabled.
RIP-1 is a class-based routing version that does not include subnet
information. This is the most commonly supported version.
RIP-2 includes all the functionality of RIPv1 plus it supports subnet
information. Though the data is sent in RIP-2 format for both RIP-2B and
RIP-2M, the mode in which packets are sent is different. RIP-2B broadcasts
data in the entire subnet while RIP-2M sends data to multicast addresses.
If RIP-2B or RIP-2M is the selected version, authentication between this controller
and other controllers (configured with the same RIP version) is required. MD5
authentication is used in a first/second key exchange process. The authentication
key validity lifetimes are configurable to ensure that the routing information
exchange is with current and supported controllers detected on the LAN.

   Find Your Products By Category