Gefen Marine Battery Gefen Marine Battery User Manual

0

Out of 0 Ratings

Owner's of the Gefen Marine Battery Gefen Marine Battery gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 84
 
page | 8
RS-232 and IP Conguration
Advanced Operation
Advanced Operation
Configuration using the Gefen Discovery Tool
When using the IP to 2 x RS-232 Converter for the rst time, it is recommended that the
unit be congured using the Gefen Discovery Tool. The Gefen Discovery Tool is free
software that is available from the Support > Downloads section of the Gefen Web site.
1. Download the Gefen Discovery Tool from the Gefen Web site. Extract the les from
the .zip le and follow the installation and conguration instructions in the included
User Manual.
2. Connect the IP to 2 x RS-232 Converter to the network.
3. Use the Gefen Discovery Tool to identify the unit on the network.
4. Refer to the Gefen Discovery Tool User Manual for important information on setting
the IP address, subnet mask, gateway, HTTP listening port, and Telnet listening port.
The following table lists the diefault IP settings for the IP to 2 x RS-232 Converter.
Description IP Address / Port Description IP Address / Port
IP Address
192.168.1.72
UDP Port
23
Subnet
255.255.255.0
Local UDP Port
50007
Gateway
192.168.1.254
Remote UDP IP
192.168.1.255
HTTP Port
80
Remote UDP Port
50008
5. After the IP settings have been set, make sure to click the Save button in the Gefen
Discovery Tool to save the changes. After saving the changes, click the Reboot button
to reboot the unit.
6. Launch a Web browser and enter the IP address, that was assigned to the
IP to 2 x RS-232 Converter, in the address bar to access the Web interface.

   Find Your Products By Category