Cisco Systems Boat Cisco Systems Boat User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Boat Cisco Systems Boat gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 128
 
3-5
Cisco Catalyst 4900M Switch Installation Guid e
78-18350-02
Chapter 3 Installing the Switch
Rack-Mounting the Switch
Note Figure 3-1 illustrates how to attach the front of the switch to the rack. You will also need to
attach the rear of the switch to the rack.
Step 2 Attach the left and right L brackets using the 12 M4 Phillips pan-head screws (six on each side) provided
in the rack-mount kit. (See Fig ure 3-1.)
Note that the L brackets connect the chassis to the rack. You can mount the L brackets to the front or rear
mounting holes of the chassis, depending on which end is in the front of the rack.
Note Some equipment racks provide a power strip along the length of one of the rear posts. If the rack
has this feature, consider the position of the strip when planning fastener points. Before
installing the L brackets on the chassis, determine whether to install the chassis from the front
or the rear of the rack.
Step 3 Slide the rear brackets into the front brackets. (See Figure 3-1.)
Figure 3-1 Attaching the L Brackets to the Switch
232125
202519

   Find Your Products By Category