Cisco Systems Boat Cisco Systems Boat User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Boat Cisco Systems Boat gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 128
 
3-6
Cisco Catalyst 4900M Switch Installation Guide
78 -18 35 0- 0 2
Chapte r 3 Installing the Switch
Rack-Mounting the Switch
Step 4 Install the chassis in the rack as follows:
a. Position the chassis in the rack (see Figure 3-2):
–
If the chassis front panel is in the front of the rack, insert the rear of the chassis between the
mounting posts.
–
If the rear of the chassis is in the front of the rack, insert the front of the chassis between the
mounting posts.
b. Align the mounting holes in the front and rear L brackets with the mounting holes in the equipment
rack.
c. Secure the chassis using eight (two on each flange) 12-24 x 3/4-inch screws through the elongated
holes in the L brackets and into the threaded holes in the mounting posts.
d. Use a tape measure and level to ensure that the chassis is installed straight and level.
Figure 3-2 Installing the Switch in the Rack
Step 5 Attach the cable guide to the right or left side of the chassis mount.
202519
232126

   Find Your Products By Category